|
|
EMA Design Automation provides this listing free of charge to those looking for personnel and or companies to fulfill business requirements. No association between these contractors and EMA is expressed and/or implied, and satisfactory performance is not guaranteed by EMA. EMA Design Automation does not endorse any of the following companies or contractors.
These service bureaus utilize PCB design tools such as Cadence® OrCAD® Capture; Cadence Allegro® PCB Editor; Cadence Concept® HDL; Cadence SPECCTRA® for OrCAD; Cadence PSpice®, CAM350® and more.
Submit your company information to EMA for consideration to be listed on our PCB Service Bureau page.
If you wish to modify or delete your listing, send an email to info@ema-eda.com.
|
20 Cotton Rd, Suite 201
Nashua, NH |
| Phone: 603-864-1300 |
| Fax: 603-864-1301 |
| Email: sales@freedomcad.com |
| www.freedomcad.com |
Contact:
Scott Miller
Description:
With 45 designers averaging over 20 years each in the PCB design layout field, Freedom CAD Services, Inc. has more than 1000 years of combined design experience. We have the knowledge and focused attention to detail and quality to support projects of any size and complexity. Our designers focus on customer service in this ever-changing environment and strive to become a seamless extension to your engineering team. We specialize in large complex, rules driven PCB design. Our broad skill-set allows us to support the engineers in translating their electrical schematics into physical board layouts that meet your requirements! We have design capabilities in NH, PA, AL, AZ, TX, KY, CA in the US and Ontario, Alberta, and Vancouver, Canada.
|
Tools:
Allegro PCB Editor; Allegro Design Entry: CIS and HDL; Allegro PCB Router; Legacy: Allegro Designer, Expert
|
Services:
Training and Consulting; PCB Design Service Bureau; PCB Fabrication, Assembly, or Test; Signal Integrity;
|
| |
|
|
900 Morrison Drive
Suite 203
Ottawa, ON |
| Phone: 613-828-0063 |
| Fax: 613-828-3113 |
| Email: don.moncion@fidus.ca |
| www.fidus.ca |
Contact:
Don Moncion
Description:
Fidus is Eastern Canada's largest independent electronic design services company. They provide hardware, PCB layout, software, FPGA and High Speed Signal Integrity services to clients in telecom, aerospace, industrial controls and medical industries.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Cadence Concept HDL; OrCAD Layout; Allegro PCB; SPECCTRA; Pspice; CAM350
|
Services:
PCB Design Service Bureau;
|
| |
|
9720 Cypresswood Drive
Suite 228
Houston, TX |
| Phone: 281-914-4531 |
| Fax: 281-894-0544 |
| Email: ronnie.martinez@7core.biz |
| www.7core.biz |
Contact:
Ronnie Martinez
Description:
7core is composed of highly motivated electronics industry professionals with many years of experience in designing everything from the smallest PCB layout to the seemingly impossible layout projects. 7core offers a staff of professional librarians as well as CAM professionals and we have day and night shifts filled by professional designers, allowing us to meet aggressive schedules.
|
Tools:
CAM 350; Allegro PCB
|
Services:
CB Design Service Bureau; Fabrication, Assembly, and/or Test; Libraries; Engineering;
|
| |
|
3081 Madison St. #B
Carlsbad, CA |
| Phone: 760-729-9340 |
| Fax: 760-729-9359 |
| Email: patrickc@911pcb.com |
| www.911pcb.com |
Contact:
Patrick Collins
Description:
911EDA offers high speed digital design including simulation FPGA (VHDL/Verilog, Altera HDL, simulation, and synthesis), and DSP General analog circuits Power supplies RF and microwave circuits Antennas Schematic & PCB Design Circuit simulation, all from within our 2 fully equipped labs. 911EDA has been servicing the San Diego electronic and manufacturing community since 1995. Please call today!
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Allegro PCB; SPECCTRA
|
Services:
PCB Design Service Bureau; Fabrication, Assembly, and/or Test;
|
| |
|
1057 Maitland Center Commons Blvd
Maitland, FL |
| Phone: 407-660-3140 |
| Fax: 407-660-3057 |
| Email: monique@acae.com |
| www.acae.com |
Contact:
Monique Cartier
Description:
For over 20 years American Computer Aided Engineering (AcAe) has been a dedicated Electronic Design Automation (EDA) support company. AcAe offers a complete range of services from supplying contractors and consulting personal to high-tech design outsourcing on-site and In-house.
|
Tools:
|
Services:
CB Design Service Bureau; Training and/or Consulting;
|
| |
|
79 Spruce Lane
Williston, VT |
| Phone: 802-373-8271 |
| Fax: 802-872-7880 |
| Email: info@accutracedesign.com |
| www.accutracedesign.com |
Contact:
Bryan Randall
Description:
Accutrace Design, LLC offers 20 years experience in the Electronics field and 10 years in PCB Design and manufacturing. Accutrace offers extensive experience with managing parts and assemblies, and since 2005 Accutrace Design has been a member of the IPC Designers Council.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test;
|
| |
|
2660 SE 39th Loop
Suite D
Hillsboro, OR |
| Phone: 503) 640-5546 |
| Fax: 503) 640-6437 |
| Email: doug@acircuits.com |
| www.acircuits.com |
Contact:
Douglas R. Nunnenkam
Description:
Advanced Circuit Solutions uses high end PCB Layout S/W tools by Cadence Design Systems, Allegro for our PCB design (layout) tools, Concept HDL and OrCad CIS as our front end tools. Its founders and senior designers have over 40 years of combined experience in PCB design.
|
Tools:
OrCAD Capture® CIS; Allegro PCB Design HDL-L; Allegro PCB Design CIS - L; Allegro PCB Performance Option - L
|
Services:
CB Design Service Bureau;
|
| |
|
1312 East 29 St
Signal Hill, CA |
| Phone: 562-426-0521 |
| Fax: 562-426-0520 |
| Email: ats4pcbfab@aol.com |
|
Contact:
Leonard Olivares
Description:
American Technology Services was founded in 1984 and provides reliable, cost effective services on time to companies nationwide for the following; Board Layout Board Fabrication and Board assembly.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Allegro PCB; OrCAD Layout; SPECCTRA
|
Services:
PCB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test;
|
| |
|
59 Queenston Drive
Ottawa, ON |
| Phone: 613-836-6641 |
| Fax: 613-963-0135 |
| Email: alanfisch@apfdesign.com |
| www.apfdesign.com |
Contact:
Alan Fisch
Description:
With over 20 years experience APF Circuit Design Inc. offers comprehensive PCB design and support, from building libraries and footprints to complete board design through to delivering manufacturing files.
New design or just updates, call APF-CDI.
|
Tools:
OrCAD Capture; Allegro PCB
|
Services:
CB Design Service Bureau;
|
| |
|
215 Konrad Crescent
Markham, Ontario |
| Phone: 905-479-0148 |
| Fax: 905-479-0149 |
| Email: rick_anderson@artaflex.com |
| www.artaflex.com |
Contact:
Rick Anderson
Description:
We specialize in the procurement and completion of engineering contracts, embracing all elements of the PCB design industry from schematic capture to completely populated high density circuit boards.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; OrCAD Layout; PSpice; Allegro PCB Design CIS - L
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test;
|
| |
|
918 Charles St
Huntington, IN |
| Phone: 260-224-0935 |
| Fax: 603-258-5520 |
| Email: pwb_engineer@yahoo.com |
| home.comcast.net/~pwb_engineer/ |
Contact:
Clyde Sprowl
Description:
C&B PWB Design Services, Inc has 30 years experience designing Printed Wiring Boards for clients around the world. We are a small company, geared to provide our customers the service and designs they deserve. Give us a chance to prove it. We guarantee total satisfaction
|
Tools:
OrCAD Capture; OrCAD Layout
|
Services:
CB Design Service Bureau; Prototype & Small Run Production Assembly;
|
| |
|
244 Primrose Drive
San Jose, California |
| Phone: 408-226-1447 |
| Fax: |
| Email: carolle@cadesign.net |
| www.cadesign.net |
Contact:
Carol Chandler
Description:
Founded in 1988 CA Design offers PCB design and layout services. Their experienced designers are trained in a variety of disciplines: large digital boards, small analog boards, ECL, RF, high speed, surface mount, chip on board, and micro-via designs.
|
Tools:
OrCad Capture; OrCad Capture CIS; Cadence Concept HDL; SPECCTRA; OrCAD Layout; Allegro PCB
|
Services:
CB Design Service Bureau; Fabrication, Assembly, and/or Test;
|
| |
|
201 Harrison Street
Suite 611
San Francisco, CA |
| Phone: 408-226-1329 |
| Fax: |
| Email: carolle@cadesign.net |
| www.cadesign.net |
Contact:
Carol Chandler
Description:
With almost 20 years in the pcb design business, CA Designs brings a team of talented professionals to your design problems. Their experienced designers are trained in a variety of disciplines: large digital boards, small analog boards, ECL, RF, high speed, surface mount, chip on board, and micro-via designs.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Cadence Concept HDL; OrCAD Layout; Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau; Fabrication, Assembly, and/or Test;
|
| |
|
1097 West Evelyn Avenue
Sunnyvale, CA |
| Phone: 408-245-7278 |
| Fax: 408-245-7205 |
| Email: dbeane@cadpartsusa.com |
| www.cadpartsusa.com |
Contact:
Don Beane
Description:
CADParts & Consulting LLC is a leader in electronic and product design services. Specializing in fast prototype development, they have a proven track record for turning concepts into products quickly and accurately. Their team of engineers and designers has the expertise to help you through circuit changes or complex designs.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Cadence Concept HDL; OrCAD Layout; Allegro PCB; SPECCTRA; CAM350
|
Services:
PCB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test; Training and/or Consulting;
|
| |
|
500 Campus Drive
Suite 101
Morganville, NJ |
| Phone: 732-972-0247 |
| Fax: 732-972-4455 |
| Email: btruax@cadpartsusa.com |
| www.cadpartsusa.com |
Contact:
Ray Smith
Description:
CADParts & Consulting LLC is a leader in electronic and product design services. Specializing in fast prototype development, they have a proven track record for turning concepts into products quickly and accurately. Their team of engineers and designers has the expertise to help you through circuit changes or complex designs.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Cadence Concept HDL; OrCAD Layout; Allegro PCB; SPECCTRA; CAM350
|
Services:
PCB Design Service Bureau; Training and/or Consulting;
|
| |
|
P.O. Box 214
Tracy, CA |
| Phone: 209-832-3779 |
| Fax: 209-832-5424 |
| Email: info@cadwerx.com |
| www.cadwerx.com |
Contact:
Philip Vela
Description:
Cadwerx offers complete PC board design solutions, with an emphasis on meeting your schedule while providing exceptional quality designs at competitive prices. Customers nationwide. High Speed, RF, Analog, etc.
|
Tools:
OrCAD Capture
|
Services:
CB Design Service Bureau;
|
| |
|
26 Pawnee Avenue
Mastic, NY |
| Phone: 631-395-1106 |
| Fax: |
| Email: billg@cdc-design.com |
| www.cdc-design.com |
Contact:
Bill Gillespie
Description:
Capital Design Consultants is a full service electrical/mechanical service bureau. We offer Engineering and Design Services.
|
Tools:
OrCAD Capture; OrCAD Layout; SPECCTRA; CAM350
|
Services:
(none)
|
| |
|
3395 South County Road 25A
Suite B
Troy, OH |
| Phone: 937-335-2442 |
| Fax: 937-339-7064 |
| Email: kfry@cmdtechnologies.com |
| www.cmdtechnologies.com |
Contact:
Karen Fry
Description:
CMD Technologies, LLC offers electronic engineering services. CPLD, FPGA design. Microcontroller designs.
|
Tools:
OrCAD Capture; OrCAD Layout; SPECCTRA
|
Services:
Contract Manufacturers; Engineering Services;
|
| |
|
150 Clark Boulevard
Suite 278
Brampton, Ontario |
| Phone: 905-488-8958 |
| Fax: 905-488-8955 |
| Email: sales@coppercad.com |
| www.coppercad.com |
Contact:
Sales
Description:
CopperCAD Design speciality is high-speed digital design. We use our custom software to design, AutoRoute using SPECCTRA, then verify the output to meet your requirements. We also sell custom Skill and LISP CadWare tools, to help to meet your demanding schedule.
|
Tools:
Cadence Concept HDL; Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test; CadWare;
|
| |
|
20410 Century Boulevard
Suite 130
Germantown, MD |
| Phone: 301.540-9913 |
| Fax: |
| Email: mkeegan@coresourcetech.com |
| www.coresourcetech.com |
Contact:
Mike Keegan
Description:
The Core Source Technologies Team includes employees, contractors, and consultants who average 20 years experience in their respective fields of expertise:Digital,Analog, PCB Layout, Micro-vias, Electronic Packaging, and Controlled Impedance/Matched Length. Our mission is to provide world-class engineering services, in a timely and cost-effective manner to our clients and their customers.
|
Tools:
Allegro®PCB Design HDL-L; Allegro®PCB Performance Option-L
|
Services:
Engineering Services; PCB Design Service Bureau; Prototype & Small Run Production Assembly; Electrical Testing;
|
| |
|
500 Clark Road
Tewksbury, MA |
| Phone: 978-863-9955 |
| Fax: 978-640-9977 |
| Email: jda@cexiinc.com |
| www.cexiinc.com |
Contact:
John Almeida
Description:
Creative Exchange, Inc. is an engineering alliance company whose specialties span the electronics HW/FW development, industrial/ME design, signal integrity/timing/cross-talk analysis, DFM, PCB layout & PCB manufacturing (fab/assmebly/box build & ATE test).
|
Tools:
OrCAD Capture; Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test; Training and/or Consulting;
|
| |
|
27521 VIA SEQUOIA
SAN JUAN CAPISTRANO, CA |
| Phone: 949-388-2609 |
| Fax: |
| Email: terry@da-pc-designs.com |
|
Contact:
Terry L. Davis
Description:
D&A Printed Circuit Designs has provided dependable and quality printed circuit design services since 1977. Please call for more information.
|
Tools:
OrCAD Capture; OrCAD Layout
|
Services:
CB Design Service Bureau;
|
| |
|
18560 Lookout Drive
Yorba Linda, CA |
| Phone: 714-970-7888 |
| Fax: 714-970-7886 |
| Email: david@dctunginc.com |
| www.dctunginc.com |
Contact:
David Tung
Description:
D.C. Tung, Inc. (DCTI) has been providing quality service since 1985. All PCB layouts at DCTI are managed by an in-house EE that insures placement and routing meets DFM and signal integrity requirements the first time.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Allegro PCB; Gerbtool; SPECCTRA
|
Services:
CB Design Service Bureau; Training and/or Consulting;
|
| |
|
575 Round Rock West Drive
Suite 575
Round Rock, TX |
| Phone: 512-828-3661 |
| Fax: 512-828-3665 |
| Email: david.jennings@d2mtechnologies.com |
| www.d2mtechnologies.com |
Contact:
David Jennings
Description:
D2M Technologies is primarily an electronic engineering company, with engineers staffed in house; we have over 75 years of combined expertise to assist in state of the art hardware/software design, reverse engineering, pcb schematic capture, layout, testing, troubleshooting.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Cadence Concept HDL; Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau; Hardware/Software Development;
|
| |
|
11913 East 450 South
LaOtto, IN |
| Phone: 260-637-3964 |
| Fax: 260-637-5641 |
| Email: astarkey@dekko.com |
| www.dekkolab.com |
Contact:
Aaron Starkey
Description:
Dekko Technical Center (DTC) provides a wide range of research and development services including electrical & chemical testing, circuit design and layout, and dimensional metrology services. DTC is an accredited member of the A2LA and a UL certificated agency.
|
Tools:
OrCAD Capture; OrCAD Layout; PSpice; Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau; Electrical Testing;
|
| |
|
18430 Brookhurst St
Suite 202-O
Fountain Valley, CA |
| Phone: 714-593-4777 |
| Fax: 714-593-4774 |
| Email: deloufek@deltechnology.com |
| www.deltechnology.com |
Contact:
David Loufek
Description:
DEL Technology Applications, Inc. provides the highest quality circuit board designs. All forms, technologies and complexities from high-speed mixed analog and digital to the simple adapter boards are handled quickly, with attention to detail.
|
Tools:
OrCAD Capture; OrCAD Layout; SPECCTRA
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test;
|
| |
|
1221 Night Hawk Lane
Knoxville, TN |
| Phone: 865-690-2982 |
| Fax: |
| Email: simpsond1@bellsouth.net |
| http://sss-mag.com:80/rfss/index.html |
Contact:
Danny Simpson
Description:
DSI offers 30+ years combined experience designing electronic products from concept through final production models, including circuit design, subsystems, microprocessor interfaces, programming, analog design, and we provide in-house PCB layout services.
|
Tools:
Allegro PCB Design CIS-L; Allegro Router Auto/Interactive Option -L; Allegro Router Performance Option - L
|
Services:
CB Design Service Bureau; Fabrication, Assembly, and/or Test;
|
| |
|
P.O. Box 72195
2912 Cheshire Drive
Marietta, GA |
| Phone: 770-973-5107 |
| Fax: 770-973-0279 |
| Email: bill_lawson@desilaw.com |
| www.desilaw.com |
Contact:
William E. Lawson
Description:
Comprehensive depth in all facets of circuit board layout with dynamic capacity. With over 20 years in the field and experience with telephony, PC boards, power supplies and network, DesiLaw, Inc. is the partner you need.
|
Tools:
Allegro PCB; SPECCTRA; CAM350
|
Services:
CB Design Service Bureau;
|
| |
|
52 Chipmunk Lane
Tijeras, NM |
| Phone: 505-286-9210 |
| Fax: |
| Email: displaygraphics@gmail.com |
| www.disp-graphics.com |
Contact:
Jeffrey H. Lewis
Description:
Display Graphics has over 20 years' experience in in quick turn low cost Microprocessor and PLD based test fixture design. Display Graphics has performed NASA/JPL certified layouts for designs currently in orbit around Mars. We can train your staff to do in house board layout.
|
Tools:
OrCAD Capture; Allegro PCB Design CIS - L
|
Services:
CB Design Service Bureau; Training and/or Consulting;
|
| |
|
105 Coronado Court
Building 9A
Fort Collins, CO |
| Phone: 970-622-8142 |
| Fax: 970-622-8143 |
| Email: glima@DGCDinc.com |
| www.DGCDinc.com |
Contact:
Guadalupe Lima
Description:
DGCD specializes in providing comprehensive PCB solutions. DGCD takes customer designs from conceptual block diagrams to delivered prototypes or any part of the that puzzle. DGCD specializes in layout design, EE design, and prototype MFG management.
|
Tools:
OrCAD Capture; Cadence Concept HDL; PSpice; Allegro PCB
|
Services:
CB Design Service Bureau; Fabrication, Assembly, and/or Test; Training and/or Consulting;
|
| |
|
1174 Lincoln Avenue
Suite 7
San Jose, CA |
| Phone: 408-293-5553 |
| Fax: 408-293-2493 |
| Email: sluebbers@sbcglobal.net |
| www.ee-design.com |
Contact:
Scott Luebbers
Description:
EE Design Consultants deal with hardware design specializing in medical instruments, power electronics, and servos.
|
Tools:
OrCAD Capture
|
Services:
Training and/or Consulting;
|
| |
|
1437 South University Drive
Plantation, FL |
| Phone: 954-577-0393 |
| Fax: 954-577-0394 |
| Email: Info@EgretTechnologies.com |
| www.egrettechnologies.com |
Contact:
Liam Pender
Description:
Egret Technologies provides our clients a full portfolio of engineering services ranging from turn-key product development to focused consulting solutions.
|
Tools:
OrCAD Capture CIS Option; OrCAD Unison PCB
|
Services:
CB Design Service Bureau; Training and/or Consulting;
|
| |
|
P.O.Box 526
Rishon Lezion, IL |
| Phone: +972-522560866 |
| Fax: +97239660948 |
| Email: elcad.pcb@gmail.com |
| www.el-cad.co.il |
Contact:
Giyora Kimhi
Description:
Elcad designs and fabricates PCB's for leading manufacturers in Israel, Europe, and the
United States. Offering over 15 yrs' experience in PCB design technologies, Elcad can meet your full range of board requirements.
|
Tools:
SPECCTRA; Allegro PCB
|
Services:
CB Design Service Bureau; Contract Manufacturers;
|
| |
|
1306 Kittle Road
Holland, OH |
| Phone: 419-861-9000 |
| Fax: 419-861-9002 |
| Email: sales@eceinc.com |
| www.eceinc.com |
Contact:
Dan Willis
Description:
ECE develops rugged electronics and software. ECE specializes in military and aerospace electronics, automotive electronic design, and industrial electronics systems. We have an experienced staff of PhD, MS, and BS degreed engineers each having 10 to 25+ years experience in their respective fields.
|
Tools:
OrCAD Capture CIS; OrCAD Layout
|
Services:
CB Design Service Bureau; Fabrication, Assembly, and/or Test;
|
| |
|
520 W Central Ave Ste E
Brea, CA |
| Phone: 877-343-7435 |
| Fax: 714-674-0043 |
| Email: ernest@fierheller.com |
| www.fierheller.com |
Contact:
Ernest Fierheller
Description:
Fierheller Engineering Corp offers consulting, hardware and software design services. Founded in 1995, in Orange County, California, we provide electrical design solutions for embedded control, RF/analog/power designs, FEC evaluates, and fixes circuits and systems with unique solutions, service and delivery.
|
Tools:
OrCAD Capture; OrCAD Layout; SPECCTRA; PSpice
|
Services:
CB Design Service Bureau; Training and/or Consulting; Fabrication, Assembly, and/or Test;
|
| |
|
25 Monroe Street
Manchester, NH |
| Phone: 603-505-6332 |
| Fax: |
| Email: ryan.donna@comcast.net |
|
Contact:
Donna Ryan
Description:
FineLines Design Services has over 20 years of experience in the layout of intricate high-speed, high-density boards, and using the latest release of Cadence Allegro layout tools installed on a portable system, FineLines offers either on-site or off-site services to clients.
|
Tools:
Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau;
|
| |
|
891 Sproule Crescent
Oshawa, ON |
| Phone: 416-768-7404 |
| Fax: 905-571-6710 |
| Email: sales@freecomwireless.com |
| www.freecomwireless.com |
Contact:
Sean Gehani
Description:
Freecom Wireless is a Canadian owned and operated company specializing in research & development of RF related technology for wireless communication. Our company offers a wide range of electronics product design and verification services.
|
Tools:
OrCAD Capture
|
Services:
CB Design Service Bureau; Verification, Debug, and Defect Correction Services;
|
| |
|
2223 Spruce Circle
McKinney, TX |
| Phone: 214-245-4828 |
| Fax: 214-550-1408 |
| Email: askme@gintuga.com |
| overview.gintuga.com |
Contact:
John-Paul P. Caña
Description:
Gintuga Technologies, LLC is an engineering design center located in Texas, our vision is to be your integrated strategic extended development partner providing cost-effective services in electronic product development for manufacture and test development. Please visit us on the web at www.gintuga.com.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; OrCAD Layout; SPECCTRA; PSpice
|
Services:
CB Design Service Bureau; Electronic Product Development and Virtual Product Development;
|
| |
|
11941 Spruce Canyon Circle
Golden, CO |
| Phone: 303-642-1123 |
| Fax: |
| Email: harrymike2@msn.com |
|
Contact:
Mike Harrington
Description:
Harrymike Engineering specialize in PCB design and layout, schematic capture, CIS database creation and maintenance, BOM creation, component engineering and fabrication/assembly house interfacing. Available to work remote, on-site, or temporarily contract basis.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; OrCAD Layout
|
Services:
CB Design Service Bureau; Training and/or Consulting;
|
| |
|
21706 Leonard
New Caney, TX |
| Phone: 281-731-4334 |
| Fax: |
| Email: Support@Honortronics.com |
| www.Honotronics.com |
Contact:
Jonathan Goudy
Description:
Honortronics is an electronic product development firm that puts the customer first. We support R&D, Design, PCB Layout, Prototyping, Testing, and more. We work closely with manufacturers to assure that you get your products right the first time.
|
Tools:
OrCAD PCB Designer
|
Services:
CB Design Service Bureau; Fabrication, Assembly, and/or Test; Training and/or Consulting;
|
| |
|
82 Walker Lane
Suite 100
Newtown, PA |
| Phone: 866-435-4907 |
| Fax: 215-860-8085 |
| Email: imet@imetcorporation.com |
| www.imetcorporation.com |
Contact:
Thomas Krol
Description:
IMET Corporation (Innovative Mechanical and Electrical Technology Corporation) provides in-house prototyping, development, PCB layout, short run production, 3D printing (rapid prototyping), full design documentation, and project management solutions.
|
Tools:
OrCAD Capture; OrCAD Layout; SPECCTRA
|
Services:
CB Design Service Bureau; Fabrication, Assembly, and/or Test; 3D Printing, Mechanical, and Electrical Design;
|
| |
|
4410 Shoalwood
Austin, TX |
| Phone: 512-260-5778 |
| Fax: 512-260-0640 |
| Email: rprekup@iondsn.com |
| www.iondsn.com |
Contact:
Rick Prekup
Description:
ionDesign can provide PCB layout service work along with "turn key" bare board fabrication and assembly solutions. Our design team consists of all senior level designers that can handle any level of layout work complex, high-speed etc.
|
Tools:
OrCAD Capture CIS; Allegro Design Entry HDL; Allegro PCB; SPECCTRA; PSpice;
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test; Training and/or Consulting;
|
| |
|
90D Raynor Avenue
Ronkonoma, NY |
| Phone: 631-981-4580 |
| Fax: 631-737-6871 |
| Email: fantico@island-designers.com |
| www.island-designers.com |
Contact:
Frank Antico
Description:
Island Designers has provided superior layouts, both military and commercial, to the electronic community for 25 years. We provide full turnkey solutions to your printed wiring board needs.
|
Tools:
OrCAD Capture; OrCAD Layout; Cadence Concept HDL; Allegro PCB; SPECCTRA; CAM350
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test;
|
| |
|
85 Rangeway Road
Building # 1
N.Billerica, MA |
| Phone: (978) 600-1333 |
| Fax: (978) 600-1331 |
| Email: dave.castine@k2-eng.com |
| www.K2-Eng.com |
Contact:
Dave Castine
Description:
K2 Engineering Services, Inc., is a company with a long established history of providing quality PCB layout and related services to our customers. Our Designers have an average of 22 years experience - call us for your next design - quality is the K2 way
|
Tools:
OrCAD Capture, OrCAD Capture CIS, OrCAD Layout, Allegro PCB, SPECCTRA
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test;
|
| |
|
15189 Springdale Street
Huntington Beach, CA |
| Phone: 714-898-1588 |
| Fax: 714-892-0930 |
| Email: info@largo-cd.com |
| www.largo-cd.com |
Contact:
Avi Shai
Description:
Largo Circuit Design, Inc. is an advanced PCB design service bureau, established in 1987. Our strong team of designers has expertise in a wide range of board technologies, from high-speed digital, RF and MCM to backplanes, power supplies and flex circuits.
|
Tools:
OrCAD Capture; Allegro PCB; SPECCTRA; CAM350
|
Services:
CB Design Service Bureau; Fabrication, Assembly, and/or Test;
|
| |
|
3120 West Carefree Hwy
Phoenix, AZ |
| Phone: 6235053100 |
| Fax: 6235053009 |
| Email: markedills@aol.com |
|
Contact:
Mark Dills
Description:
A single designer (Mark Dills) with over 25 years of PCB layout experience. I work on one design at a time. No muti-tasking of PCB design efforts. I will not farm out any layout work unless the customer request this service. At your site or in my office.
|
Tools:
Cadence Concept HDL; Allegro PCB
|
Services:
CB Design Service Bureau;
|
| |
|
1906 Route 52
Suite D
Hopewell Junction, NY |
| Phone: 845-897-4960 |
| Fax: |
| Email: mettrix@mettrix.com |
| www.mettrix.com |
Contact:
Richard
Description:
Mettrix Technology has been providing PCB design and contract manufacturing services since 1997. Our experience includes high-speed designs, mixed technology, multilayer, low cost, and low-volume jobs.
|
Tools:
SPECCTRA
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test; Training and/or Consulting;
|
| |
|
4130 E. Wood Street
Suite 100
Phoenix, AZ |
| Phone: 602-437-5068 |
| Fax: 602-437-5299 |
| Email: bhamilton@mjsdesigns.com |
| www.mjsdesigns.com |
Contact:
Betsy Hamilton
Description:
MJS Designs, Inc. engineers, designs, assembles, and tests printed circuit boards. Since 1976, we have provided PCB layout services. Our designers are CID+ certified. Our team of electrical engineers facilitate new product development.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Allegro PCB; and SPECCTRA
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test; Training and/or Consulting;
|
| |
|
3500 Thomas Road
Suite G
Santa Clara, CA |
| Phone: 408-654-1100 |
| Fax: 408-654-1107 |
| Email: craig.arcuri@nbscorp.com |
| www.nbscorp.com |
Contact:
Craig Arcuri
Description:
NBS Design utilizes the combined experience and expertise of our team to integrate each step of the manufacturing process. Founded in 1999, NBS Design understands the complexities governing your industry, a knowledge-base that plays an important role in rapidly delivering quality, value-driven solutions.
|
Tools:
Allegro®PCB Design HDL-L; Allegro ® Performance Option -L; Allegro® PCB Design HDL - XL; Allegro® Router Auto/Interactive Option - L
|
Services:
CB Design Service Bureau; Fabrication, Assembly, and/or Test;
|
| |
|
27 Water Street, Suite 203
Wakefield, MA |
| Phone: 617-338-4171 |
| Fax: 617-451-9081 |
| Email: mleary@newgrangedesign.com |
| www.newgrangedesign.com |
Contact:
Matthew Leary
Description:
Newgrange Design has provided the highest level OrCAD PCB Design service for 9 years. Our staff includes a former OrCAD instructor. Customers include GE, BAE, and Toshiba as well as dozens of small and mid-size companies. Dedicated to superior customer service.
|
Tools:
OrCAD Capture CIS; OrCAD Layout; SPECCTRA; PSpice
|
Services:
CB Design Service Bureau; Training and/or Consulting;
|
| |
|
201 Next Technology Drive
Madison, AL |
| Phone: 256-772-0400 |
| Fax: 256-772-0420 |
| Email: larry.tate@nextekinc.com |
| www.nextekinc.com |
Contact:
Larry Tate
Description:
Nextek, Inc - A Contract Manufacturer that also offers an ISO Certified PCB Design Department with Senior Level Designers that have a combined experience of 125 years. Nextek also offers PRo-E Mechanical support for all of your Electo-Mechanical needs.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Allegro PCB; SPECCTRA; CAM350
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test;
|
| |
|
14 Heathcote Avenue
Hertfordshire, |
| Phone: 44 7913 250489 |
| Fax: 44 8717 819318 |
| Email: nhdesigns@tiscali.co.uk |
| www.nhdesigns.co.uk |
Contact:
Neil Hopkins
Description:
NHDesigns has been designing printed circuit boards around 25 years for companies within the international market. Using some of the latest CAD tools they can design for you, single sided PCB, double sided PCB, and double sided PCB with ground/power planes.
|
Tools:
OrCAD Capture; Cadence Concept HDL; Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau;
|
| |
|
39 New Haven Road
Seymour, CT |
| Phone: 203-888-3253 |
| Fax: 203-888-6244 |
| Email: paul@n9d.com |
| www.n9d.com |
Contact:
Paul H. Frechette
Description:
Number Nine Design is a Cadence based Service Bureau with a talented staff of design engineers. Collectively, we have decades of design experience and have used Allegro since it's initial development from the Telesis product (Release 1.0beta)
|
Tools:
OrCAD Capture; OrCAD Capture CIS; Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau; Training and/or Consulting;
|
| |
|
3590 North First Street
San Jose, CA |
| Phone: 408-228-5580 |
| Fax: 408-228-5590 |
| Email: sales@nuvation.com |
| www.nuvation.com |
Contact:
Chris Hallahan
Description:
NUVATION provides SI consulting and full turnkey embedded system design from requirements to production. Expertise includes RF, analog/digital, mixed PCB design services along with FPGA, MCU/DSP FW, and embedded SW.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; PSpice; Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau;
|
| |
|
122 Edison Drive
Middletown, OH |
| Phone: 513-360-0800 |
| Fax: 513-360-0888 |
| Email: jwells@nuwaves-ltd.com |
| www.nuwaves-ltd.com |
Contact:
Jeff Wells
Description:
NuWaves Engineering is an RF and wireless engineering development company which provides state-of-the-art design services to several markets. NuWaves creates turnkey custom designs that go from conceptual idea to production.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; OrCAD Layout; Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau; Contract Manufacturers; Fabrication, Assembly, and/or Test; Design Engineering Services; Product Development;
|
| |
|
7711-104 Welborn Street
Raleigh, NC |
| Phone: 919-981-0123 |
| Fax: 919-981-7317 |
| Email: sales@omnisyscorp.com |
| www.omnisys.com |
Contact:
Fred Frantz
Description:
Omnisys offers contract product development services for new or existing products. Specializing in real-time control and communication systems, Omnisys offers electronic hardware design, FPGA and CPLD design, software development, and mechanical design.
|
Tools:
OrCAD Capture; OrCAD Capture CIS; OrCAD Layout; SPECCTRA
|
Services:
CB Design Service Bureau;
|
| |
|
1075-B Serpentine Lane
Pleasanton, CA |
| Phone: 925-401-2204 |
| Fax: 925-401-2010 |
| Email: sales@optimumdesign.com |
| www.optimumdesign.com |
Contact:
Greg Beck
Description:
Optimum Design Associates provides AWARD WINNING PCB layout services with PADS-Expedition-Allegro-Protel, pcb engineering services, FPGA design, libraries for PADS-Expedition and Library Administration. Support services include pcb fabrication and assembly.
|
Tools:
OrCAD Capture; Allegro PCB; SPECCTRA; CAM350
|
Services:
(none)
|
| |
|
127 Bellhurst Road
Meridianville, AL |
| Phone: 256-828-1238 |
| Fax: |
| Email: Phil.head@padmasters.com |
| www.padmasters.com |
Contact:
Phil Head
Description:
Padmasters deals with engineering and layout of complex circuit boards.
|
Tools:
OrCAD Capture CIS; Allegro PCB; SPECCTRA
|
Services:
CB Design Service Bureau;
|
| |
|
|
Forums
ActiveParts.com