EMA Academy

Creating Fabrication Drawings Video Demonstration

Course Info

Getting Started with LiveDoc

Want to save your progress and be able to pickup where you left off?

The following text can be copied and pasted for fabrication notes using CTRL+C and CTRL+V:

Notes:
1. All dimensions are in mm unless otherwise specified.
2. Fabricate PCB in accordance with IPC-6012A, Class2; per IPC-6011 using customer supplied data files.
3. Primary Side of the board is shown: Top
4. Materials: Plastic sheet laminated, glass base, epoxy resin type FR4 series or equivalent per IPC-4101 with Tg >/= 170 DEG C and a TD >/= 330 DEG C. Base thickness on all layers per stackup detail.
5. Finished board shall have a UL rating of UL 94V-0.
6. Finished hole sizes are shown in drill chart.
7. Apply green LPI solder mask, matte finish, conforming to IPC-SM-840, Class T over bare copper onto outer surfaces using appropriate artwork.

EMA Design Automation