Select Setup > Application Mode >General Edit from the menu.
In the Visibility tab, set Global Visibility to On.
In the Find tab, select All On.
Highlight the board.
Select the Move button on the toolbar.
Click the canvas to place your board at a new location.
Zoom in to the bottom of the board.
Select Setup > Change Origin from the menu.
Right click the corner of the board and select Snap Pick to > Segment Vertex.
Select Place > Component Manually from the menu.
In the Advance Settings tab, select Library.
In the Placement List tab, select Format symbols from the drop-down.
Select the box next to ASIZEH.
Click the canvas to place.
Close the placement window.
Select Add > Text from the menu.
In the Options tab, select Drawing Format and Title_Block as the Active Class and Subclass.
Set the Text Block to 6.
Click the canvas and type the desired text.
Right click and select Done.
In the Visibility tab, select Last.
In the Find tab, select All Off then select Text.
Edit the text on the board as needed.
Note: To delete, right click and select delete. To move, click and drag. To rotate select the text, right click and choose spin.
Select Edit > Change Object from the menu.
Uncheck the line width box and select Text Block.
Change the TextBlock to 2.
Click on the reference designator text for each component.
Select Manufacture > Customize Drill Table from the menu.
Select Auto generate Symbols and Yes. Click OK.
In the Design Workflow, select Manufacturing Preparation > Documentation > Drill Chart.
Leave the defaults and click OK to create drill chart.
Click the canvas to place the drill chart.
In the Design Workflow, select Manufacturing Preparation > Documentation > Cross Section Detail.
Set the Text Block to 3.
Click OK and click the canvas to place.
Select Manufacture > Dimension Environment from the menu.
Right click and select Linear Dimension.
Click corners of the board to dimension. Click to place the dimension.
Right click and select Done.
Select Setup > User Preferences from the menu.
Select File_management > Output_dir.
Add the text .artwork to the first input field. Click OK.
Note: This will create a folder for your exported artwork.
Select the Color button from the toolbar.
Select Off for Global Visibility.
Note: This will turn off all layers and ensue only the necessary layers are selected.
In Drawing Format, select All.
In Manufacturing, select NClegend1-3 and Xsection_Chart.
In Geometry, select Design_Outline and Dimension.
In the Design Workflow, select Manufacturing Preparation > Documentation >Artwork (Film Records) Setup.
Right click in the film window and select Add.
Assign FAB as the film name and click OK.
Change the Undefined line width to 0.127.
Complete this process for all the Artwork Films using the provided table below:
Note: If you need to make changes to existing films, expand the film name. Add or cut layers as needed. To view a film in the PCB Window, right click and select display for visibility or in the Visibility Tab, select from the films in the drop-down.
Close the Artwork setup window and the Color window.